Duratec 29er MTB SRAM NX Eagle Tandem

“This Tandem is a serious Mountain Bike Tandem. Equipped with the cutting edge and contemporary SRAM NX Eagle transmission for a super wide range of gears…enabling the riders to ride any terrain!

The Duratec 29er MTB Sram NX Eagle Tandem is the perfect balance of ride quality and power, with doing it all versatility & durability. The Duratec 29er MTB Sram NX Eagle Tandem is the ideal tandem for serious off-road, trail riding, expeditions and “tandeming” adventures! Whether you are bike packing, cycling a multi-day challenge or exploring your local trails or backcountry mountains…The Duratec 29er MTB Sram NX Eagle Tandem can do it all!

Features:

• 7020T6 aluminium alloy handmade tandem frame with large diameter tubes for high rigidity.
• 9 frame sizes.
• Many Colours in Gloss and Matt.
• Duratec aluminium Tandem specific disc forks – Suspension upgrades available. Rockshox Recon RL Boost 29.
• 142/12 Rear Thru-Axle.
• 100/15 Front Thru-Axle.
• Rear Rack mounts – Front Rack mounts can be added.
• Optimized for wide rims and tyres…making versatile riding!
• SRAM Eagle transmission 1 x 12sp
• SRAM Hydraulic 203mm / 180mm disc brakes
• Wheelset – DT Swiss/SRAM 7xx
• Tyre size 29 x 2.25.
• SRAM Eagle Transmission 1 x 12sp.
• Tandem Experience Training is included when you buy.

Buy this Tandem with our Cycle to Work Scheme. Read about specialist Tandem Insurance and also Servicing which with all Tandems purchased from us has 2 years of service included – go to our Services page here.

What frame size do we need?

A common question and one that we do take seriously as it makes the difference when riding a Tandem safely and for long term enjoyment.

How do we work this out? 

Here are some pointers we talk about regularly with our customers.

• Your ‘Saddle Heights’ are critical and found commonly too low for efficient cycling.
• Once your ‘Saddle Height’ is correct then your feet will only just touch the ground, by tiptoe.
• To find the correct ‘Saddle Height’ we require a ‘Standover’ measurement.
• To do this simply stand with your back to a wall with your cycling shoes fitted, then place a book (approx. 30mm wide) between your legs and position so that it touches you firmly.
• Then measure from the top of the book to the floor.
• This measurement is your ‘Standover.’
• Remove 100mm from this ‘Standover’ measurement and this will leave you with your ideal saddle height to start with.
• The ‘Saddle Height’ is measured from the top/middle of the saddle to the centre of the chainset.

Now when looking at our Frame Measurements matrix below and look for the Standover in column ‘O’.  The measurement shown is the maximum of your Standover for front and rear riders.  Therefore you can look at frames that are lower than this.

If you are still not sure of your Tandem Sizing please click below to assist you further.