Landescape Deore Belt Tandem

“A simple 2 x 10 transmission offering enough range to accommodate all kinds of Tandeming. Co-Motion/Andel chainset drive throughout fitted with GATES  Belt Crossover Drive and the very easy to use SHIMANO Deore 2 x 10  wide-ratio cassette. Combined with the hydraulic brake system from HOPE/MAGURA.”

Our Landescape aluminium Tandems began life in 2002 and are beautifully hand-made. If you think you know aluminium frames then think again!.  Our high-quality Landescape Tandems are manufactured from tubing specifically made and drawn for Tandems. We use 7020T6 with a wall thicknesses of 1.8mm at the joints and butted to 1.4mm in the centre of the tubes.  The post-weld strength of 7020T6 is greater and therefore gives a stronger, lighter frame than less expensive frames made from cheaper materials and sourced from the Far East. The material we use, its butting and lightness make for a stiffer frame with better power efficiency and handling but not at the expense of comfort.

With lightness and strength hand-in-hand, the standard offering of all our Landescape Tandems is that they are built-in custom sizes and in the Direct Lateral Design. You can be assured that we can build your Tandem to suit your exact needs. From track to trail, on or off-road or just pootling along, enjoying the countryside for a day or an extended tour, we have a Landescape Tandem for you.

Features:

• 7020T6 aluminium alloy handmade tandem frame with large diameter tubes for high rigidity built in a Direct Lateral Design.
• Custom Frame Sizes.
• Many Colour combinations in Gloss and Matt and any RAL® Colour.
• Aluminium Tandem specific disc forks – Suspension upgrades available.
• 142/12 Rear Thru-Axle. 
• 100/15 Front Thru-Axle.
• Rear Rack mounts – Front Rack mounts can be added.
• Optimized for wide rims and tyres…making versatile riding!
• Drivetrain: Co-Motion/Andel Tandem – Crank lengths – Front 170, 172.5 or 175 mm – Rear 165, 170 or 172.5 mm.
• Chains/Belt – Shimano Chain Drive with Gates Belt Crossover Drive.
• Hope Hydraulic disc brakes with Magura MDR 203mm Rotors.
• Wheelset – Hope Pro 4/Halo Vapour or H+Son Archetype Rims.
• Sapim Butted Spokes.
• Tyre sizes from 38-45mm.
• Shimano Deore – 2 x 10 – 11-46.
• Also available in 27.5″ and 29″ Wheels Sizes.
• Tandem Experience Training included when you buy.

Buy this Tandem with our 0% Finance or on our Cycle to Work Scheme. Read about specialist Tandem Insurance and also Servicing which with all Tandems purchased from us has 2 years of service included – go to our Services page here.

What frame size do we need?

A common question and one that we do take seriously as it makes the difference when riding a Tandem safely and for long term enjoyment.

How do we work this out? 

All of our Landescape Tandems are built as a custom frame which simply means

• Your sizes taken into account via our virtual data sizing forms or,
• A visit to us at our store to be sized on our Calfee Sizer.
• From this data we will draw your Tandem in our TandemCAD and supply this to you in a PDF format.
• The TandemCAD is used in the production of your Landescape Tandem by our factory and by ourselves when assembling the Tandem.
• We will take into account current riding styles and advise accordingly for Tandem riding.

We charge to produce a TandemCAD for you that is refundable once the Tandem is placed on order. Click below if you wish to go through this process.