Landescape Rohloff Chain Tandem

“The little brother of our Rohloff Belt Tandem drive using traditional chain transmission. SHIMANO chain drives throughout fitted to STRONGLIGHT chainset and the very reliable ROHLOFF internal gear hub. Combined with the cable brake system from TRP/MAGURA .”

Our Landescape aluminium Tandems began life in 2002 and are beautifully hand-made. If you think you know aluminium frames then think again!  Our high-quality Landescape Tandems are manufactured from tubing specifically made and drawn for Tandems. We use 7020T6 with a wall thickness of 1.8mm at the joints and butted to 1.4mm in the centre of the tubes.  The post-weld strength of 7020T6 is greater and therefore gives a stronger, lighter frame than less expensive frames made from cheaper materials and sourced from the Far East. The material we use, its butting and its lightness make for a stiffer frame with better power efficiency and handling but not at the expense of comfort.

With lightness and strength hand-in-hand, the standard offering of all our Landescape Tandems is that they are built in custom sizes and in the Direct Lateral Design. You can be assured that we can build your Tandem to suit your exact needs. From track to trail, on or off-road or just pootling along, enjoying the countryside for a day or an extended tour, we have a Landescape Tandem for you.


  • 7020T6 aluminium alloy handmade tandem frame with large diameter tubes for high rigidity built in a Direct Lateral Design.
  • Custom Frame Sizes.
  • Many Colour combinations in Gloss and Matt and any RAL® Colour.
  • Aluminium Tandem specific disc forks – Suspension upgrades available.
  • 142/12 Rear Thru-Axle – To be confirmed. 
  • 100/15 Front Thru-Axle.
  • Rear Rack mounts – Front Rack mounts can be added.
  • Optimized for wide rims and tyres…making versatile riding!
  • Drivetrain: Stronglight Impact Tandem – Crank lengths – 170/170 – Ring size 44/18
  • Total Shimano Chain Drive.
  • TRP Cable disc brakes with Magura MDR 203mm Rotors.
  • Wheelset – Hope Pro 4/Halo Vapour or H+Son Archetype Rims.
  • Sapim Butted Spokes.
  • Tyre sizes from 38-45mm.
  • Rohloff Internal Transmission 1 x 14.
  • Also available in 27.5″ and 29″ Wheels Sizes.
  • Tandem Experience Training is included when you buy.

Buy this Tandem with our Cycle to Work Scheme. Read about specialist Tandem Insurance and also Servicing which with all Tandems purchased from us has 2 years of service included – go to our Services page here.

From £5795, see below to add options and accessories. Configure your Tandem now!
 "We had 'The Tandem Experience', a really excellent introduction to riding a bicycle made for two. Very thorough training on technique for riding a tandem (hint: it's quite different to a normal bike), then a whole day hire of a touring tandem, with a very pleasant 25 mile circular route map supplied. Bike was very good quality, and training unhurried and well delivered. Highly recommended, if you're thinking of trying out a tandem!" James McRae, Local Guide - Google Review

Full Specification

  • Frame: Aluminium 7020T6 – Aluminium alloy AlZn4,5Mg.
  • Fork: Aluminium Tandem specific disc forks – Tapered 1 1/8″ to 1 1/2″.
  • Suspension Fork upgrades available.
  • Derailleurs/Shifters: Rohloff.
  • Brakes: TRP Spyke Cable with Magura 203mm Rotors.
  • Headset: FSA Orbit FS Sealed Bearing.
  • Drivetrain: Stronglight Impact Tandem – Crank lengths are 170/170 – Ring sizes 44/18.
  • Bottom Bracket: Shimano Square Taper.
  • Cockpits: Flat or Riser / Upturn  – See Options Below.
  • Seat Posts: Deda and Cane Creek Thudbuster ST G4 – See Options Below.
  • Saddles: See Options below – not included in the price.
  • Pedals: See Options below – not included in the price.
  • Wheelset – Hope Pro 4/Halo Vapour or H+Son Archetype Rims.
  • Tyres: Schwalbe Marathon 28″ x 1.6″ (45mm).
  • Cassette: Rohloff.
  • Mudguards: See Options below – not included in the price.
  • Front & Rear Racks: See Options below – not included in the price.
  • Bottle Cages: See Options below – not included in the price.
  • Other items shown in our Options and Accessories below.

What frame size do we need?

A common question and one that we do take seriously as it makes the difference when riding a Tandem safely and for long term enjoyment.

How do we work this out? 

All of our Landescape Tandems are built as a custom frame which simply means

  • Your sizes taken into account via our virtual data sizing forms or,
  • A visit to us at our store to be sized on our Calfee Sizer.
  • From this data we will draw your Tandem in our TandemCAD and supply this to you in a PDF format.
  • The TandemCAD is used in the production of your Landescape Tandem by our factory and by ourselves when assembling the Tandem.
  • We will take into account current riding styles and advise accordingly for Tandem riding.

We charge to produce a TandemCAD for you that is refundable once the Tandem is placed on order. Click below if you wish to go through this process.

Go to our Custom Sizing here!


Frame Geometry

Frame Measurements

Frame Size A1/2 Top Tube F/R B1/2 Seat Tube F/RC2 Chainstay D1/2 Bottom Bracket F/RF Head Tube H WheelbaseK Fork Offset O1/2 Standoverα Head Angleβ1/2 Seat Angle

Paint Options

Landescape Colour Choices

Many colours are available for Landescape Tandems in both Matt and Gloss finishes. We are also able to offer in any RAL colour too!

Landescape Paint Finishes

We offer three paint styles for your Landescape Tandem. Opaque, Roadline (shown) and Speedline

Landescape Decal Choices

Landescape decals are available in White, Black and Silver. Fitted to Down Tube, Boom Tube and Headtube.

Options & Accessories

Pedals and Clips

We can supply any pedals or you can fit your own if preferred.
Pedals commonly used are: Shimano - 324 SPD / Flat, Shimano - 520 SPD, Classic Alloy (as shown) and Studded Platform. Half Clips can be supplied to fit Shimano 324 and Classic Alloy.


Saddles offered are from: Bioflex Ongel Ozone (as shown) - in various widths. Brooks - all models and Selle Italia - all models.


We fit the correct size for use with the tyre width of your choice and they come in both Black & Silver. Available from Flinger (as shown) and SKS.

Suspension Seatposts

Supplied as Standard to the rear position is the Cane Creek Thudbuster ST G4 (as shown) or the System EX EL for a reduced cost.


Handlebars can be changed and the following are popular choices. Front - Jones Loop SG 64cm rise (as shown). Front/Rear - BLB Big Smoker Riser Bar 7.6cm rise. Rear - Profile Upturns 47cm wide.

Rear Stem Adaptions

Our Tandems are supplied with a standard adjustable rear stem, however depending on the sizes of both riders the rear handlebars may require to be higher. We supply a sleeve/stem combination to allow this to our existing rear stems. Please contact us to discuss the options. To fit seat post sizes of 27.2mm, 29.8mm and 31.6mm.


Racks for Panniers: Front/Rear - Tubus, Front/Rear - Blackburn and Rear - Topeak Super Tourist DX (as shown).

Panniers & Top Bags

Panniers from Ortlieb & Topeak (as shown with drop down panniers).

Bottles and Cages

Standard aluminium Pulse cages from Zefal and also the superb non cage bottles from Fabric (as shown) in two sizes and in clear or smoke.

Dynamo Package

Schmidt SON dynamo hub (as shown), superb Supernova E3 Pro 2 front light combined with Supernova 3 rear light. This package can be added to a Sinewave Cycles Reactor USB top cap charger for your USB-powered devices.

Sinewave Cycles Reactor USB

Sinewave Cycles Reactor USB top cap charger for your USB-powered devices.


Topeak Road Master Blaster to fit neatly into your frame for your on the move pressure top up and the Topeak Joeblow Turbo Floor Pump (as shown) to keep pressure topped up with ease.


Park Tool Peg Spanner SPA1 to fit all of our Tandem eccentrics. Combine this with a multi tool pack, puncture outfit and tyre levers and your ready for your travels.

Tandem Rak

To transport your Tandem on roof bars, rear of a Transporter or on a TowBar we have them all, please ask for more details.

NeoDrive E-Assist Addition

On Tandems with a vertical quick release drop out we are able to supply as an e-assist upgrade at the point of order. Please contact us to discuss the options.


On some of our tandems a kickstand can be fitted to frame mount, ideal for touring Tandems. The Pletscher Twin leg stand is available in Silver or Black and 26"/27.5"/28"/292 wheels.

Extra Bottle Bosses

If there is a need for extra bosses for water bottles over the standard offer then this can be done.

Custom Sizing

This is a standard on our Landescape Tandems but is offered on our Co-Motion Tandems.

V-Brake addition to Discs

We offer on our Duratec, Landescape and Co-Motion Tandems the facility of a third/parking brake operated by either front or rear by a third lever. The brake and lever costs are additional to this upcharge.

Di2 Preparation

If buying a Co-Motion or Landescape Tandem with Di2 then this upcharge is made to prepare the frame.

Touch Up

Touch Up can be ordered for all of our Tandems.


We recommend the Magura MDR-P 203mm Rotors fitted to our Landescape and Co-Motion Tandems. Offering a special patented interlocking of the outer and inner rings (Dovetail Interlink Technology) giving optimum braking performance even under heavy loads

Cane Creek Ergo Stoker Levers

To be used in conjunction with a drop handlebar to allow a conventional riding position.

Ergon Grips

Ergon - developed for riders seeking the most hand positions. The GP1 grip combined with a 5 finger multi-position bar end featuring rubberised inserts for a positive grip.

How to buy

If you don’t know the size/saddle height you require:

  • Complete a sizing fit either in-store or virtually – click here to book.
  • Choose a Tandem, specification and any accessories via our website (within each Tandem product), over the phone or email or in-store.
  • We will contact you to secure your order with a 50% deposit.
  • Or arrange Finance Options.
  • You will receive a delivery ETA.
  • Take delivery of your new Tandem or global shipping can be arranged.
  • Ride your new Tandem!

If you do know the size/saddle height you require:

  • Choose a Tandem, specification and any accessories via our website (within each Tandem product), over the phone or email or in-store.
  • We will contact you to secure your order with a 50% deposit.
  • Or arrange Finance Options.
  • You will receive a delivery ETA.
  • Take delivery of your new Tandem or global shipping can be arranged.
  • Ride your new Tandem!

Alternatively – contact us (phone or email or in-store) to start a no-obligation, no pressure discussion to decide if a Tandem is for you and how to buy the perfect fit.